• Satin finished Stainless Steel
• Vandal and Suicide Resistant
• 203mm [W] x 508mm [H]
• Tapware:  Self-closing or standard

A1741-FA

Stainless Steel Security Shower, Front Fixed

• Similar to A1741, but front fixed

• Vandal and Suicide Resistant
• Watermark Approved SBAs
• Specify:
  

    A519-1 Shower set (Hot & Cold handles and Rose)
    A519-2 Conical Rose only
    A519-3 Conical Handle with SBA Cold only
    A519-4 Conical Handle with SBA Hot only

• Clean Hygienic Design
• Water Saving
• Vandal Resistant
• Easy to Operate
• Low Maintenance
• Easy to Install
• Adjustable Flow Time
  

    Hydraulic Requirements at Each Tap
        Min. Flow pressure:  1.0 Bar
        Flow Time:                 1-50 seconds
        Flow Rate:                  0.4 litres/second at 3 Bar flow pressure

• Satin finish 304 Stainless Steel
• Vandal Resistant
• Specify 4 or 6 Users
• Single supply inlet and single drainage point
• 1902mm [H] x 203mm [Sq]
  

• AS1428.1-2001 compliant Grab Rail when installed correctly
• 900mm; Satin Finished Stainless Steel, 32mm Dia, 60mm clearance, concealed fixings.
• Does not include Handset

• AS1428.1-2001 compliant Grab Rail when installed correctly
• Satin Finished Stainless Steel, 32mm Dia, 60mm clearance, concealed fixings.
  

• AS1428.1-2001 compliant Grab Rail when installed correctly 
• Satin Finished Stainless Steel, 32mm Dia, 60mm clearance, concealed fixings

• AS1428.1-2001 compliant Grab Rail when installed correctly 
• Satin Finished Stainless Steel, 32mm Dia, 60mm clearance, concealed fixings

• 1000mm Ceiling Support
• Concealed fixings
• Adjustable at both ends
• Hooks Included

GSCAL12 1200mm Square
GSCAL15 1500mm Square

• 25mm Diameter, 1000mm Ceiling Support
• Satin Finished Stainless Steel,  concealed fixings
• For use with B204.1 hooks see below
• For use with B204-2 and B204-3 vinyl shower curtains see below

GSC10 1000mm Square
GSC12 1200mm Square
GSC15 1500mm Square

Stainless Steel Shower Curtain Hook  Vinyl Shower Curtain

• 2mm [Dia] stainless steel
• For use with 25 and 32mm diameter shower curtain rods
• For use with B204-2 and B204-3 vinyl shower curtains

• 1065mm W x 1830mm H
• Requires 7 hooks (B204-1)

• 1780mm W x 1830mm H
• Requires 12 hooks (B204-1)

• Curtain Rod: 18-gauge (1.2mm) stainless steel tubing with satin finish: 30mm outside diameter
  
• Standard lengths: 1016mm & 1780mm

• Solid Phenolic seat - cannot delaminate
• Stainless Steel Frame and Brackets
• Meets Disabled Code
• 960mm [W] x 390mm [D]